Your
HP Pavilion dv6000 Keyboard may suddenly stop working. If this happens to you, it may be the keyboard cable is loose or pull out the results. If you are fixed in their own service technicians with the help of this problem is not interested in, you'll be pleased to know that you can remove the laptop keyboard, fast and relatively easy. As the design of these notebooks, allowing users to replace their common components, you should be able to complete the task, even if you do not know the computer.
1
Turn off your HP DV6000 laptop, and remove the AC power cord. Close the screen, open the laptop upside down, so the rear panel and the hinge is closest to you.
2
The battery compartment at the bottom of the computer. Then along the side of the laptop to find the rear panel of the four screws.
3
Remove the four screws using the screwdriver.
4
The right to open the laptop, turn on the screen, so you have ample opportunity to
HP Laptop Keyboard.
5
Use your fingers to pry open rectangular hinged lid computer. Plastic hinge cover located above the keyboard and just below the LCD screen.
6
Remove the four screws along the top of the keyboard.
7
Lift the
HP Pavilion dv6000 Keyboard from the top to expose a single keyboard ribbon cable to the back of it.
8
Check the cable into the port security. If not, plug in this cable, it is safe, has not given it. In reverse order, you take it apart to re-assemble your computer keyboard, it should work fine.